East Gate 16 Baolian Temple Road, Xuzhou Economic and Technological Development Zone, Jiangsu Province
The cold powder machine produced by Jiangsu Senrong is used to cool the dried meat and bone meal.
The cold powder machine is composed of a stator, a rotor and dust removal. The stator is designed as a cylindrical tube with end plates and brackets at both ends, and is equipped with an observation hole to observe the state of the material in the cold powder machine in real time. The stator is provided with an air inlet and an exhaust port, and the hot air is sucked into the bag dust removal system through a centrifugal fan to be eliminated, and the cold air enters the cold powder machine to exchange heat with the material, which can effectively reduce the material temperature. The rotor is equipped with a stirring arm and a stirring paddle for lifting the product into the cold air flow. The stirring paddle is assembled. The mixing paddle can be adjusted as needed to adjust the cooling time of the material. In order to avoid material loss, the dust removal system can effectively block the meat and bone powder particles from overflowing the cold powder machine. At the same time, the bag type dust removal system is provided with an automatic pulse dust removing device, which effectively removes the dust accumulated on the surface of the dust filter bag and improves the efficiency of the dust collector.